No products in the cart.
MULTIMATIC 200 MUTLPROCESS MILLER WELDER
Light Industrial Applications
– Light fabrication
– Maintenance and repair
– Mechanical contractor
– Construction
| Lightweight MIG, Stick and DC TIG welder. Impact-resistant case provides durability on the job. This all-in-one multiprocess welder connects to 120 or 230 volt input power. Welds up to 3/8” mild steel. |
| Technical Specifications | ||
|---|---|---|
| Processes |
MIG (GMAW) |
|
| Input Power | 230 V, 1 phase, 50/60 Hz | |
| Rated Output | MIG/flux-cored: 150 A at 21.5 V, 20% duty cycle TIG: 100 A at 14 V, 100% duty cycle 150 A at 16 V, 30% duty cycle Stick: 100 A at 24 V, 100% duty cycle 150 A at 26 V, 30% duty cycle |
|
| Wire Feed Speed |
70–425 ipm (1.8–10.8 m/min) | |
| Max. Open-circuit Voltage | 90 VDC | |
| Net Weight | 13.2 Kg | |
| Dimensions (H x W x D) | 368 x 248 x 432 mm | |
Complete Included:
Power source
- 10 ft. (3 m) MDX™-250 MIG gun
- 13 ft. (4 m) cable with electrode holder and 25 mm Dinse-style connector
- 10 ft. (3 m) work cable with clamp and 25 mm Dinse-style connector
- Power cord with MVP™ plugs for 120 and 230 V
- Flow gauge regulator and gas hose for argon or AR/CO2 mix
- Two contact tips for .030 in. (0.8 mm) wire, and two contact tips for .035 in. (0.9 mm) wire
- Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
- Information/settings chart and quick setup guide
- Material thickness gauge
Warrantied: 3 years
